| 
|
Morpheus Technologies is proud to announce the release of the Genesis Velcro closed B.A.S.E container. Inspired by the development of the predominantly slider down OSP canopy made by Atair and the demands of slider down jumping, Morpheus felt the need to revisit what was once the most popular design of B.A.S.E container.
The key benefit of Velcro closed containers over any other design comes into play when jumping with a hand held pilot chute. The Genesis is equipped with a Triple Function Shrivel Flap, TFSF which allows the jumper to configure the shrivel flap in a bidirectional way.
- What this means is that when a jumper is deploying from a stowed position, the shrivel flap is placed in its traditional direction with the bridle coming out from the bottom of the shrivel flap.
- When a jumper is deploying from a hand held position, the shrivel flap is configured upside down so that the bridle is coming from the top of the shrivel flap which creates the shortest distance from the shrivel flap to the pilot chute in hand allowing for the least amount of exposed bridle. This configuration helps reduce the opportunity for the bridle to snag on the corner of the container when at an exit point with the wind on your back.
- The side tuck pockets that keep the shrivel flap/bridle in a clean manner for a stowed jump can be teased out and act as a primer for the Velcro for low freefalls. Hence the triple function.
The Genesis container is designed to be very packer friendly and will fit all B.A.S.E specific canopies.
It features a snag resistant shrivel flap
that tucks into the top flap of the container. This
allows air to flow cleanly over the top of the container,
helping to ensure that the shrivel flap is not prematurely
stripped away during high-speed free fall. This design
has also been proven to help prevent the potential of
snagging whilst maneuvering in tight areas.
standard features options order
The distinct design of the pack tray and side flaps
makes packing easier, as it holds its shape well when
placing the canopy in the tray. Also, the corners at
the bottom of the container are not enclosed, giving
the canopy the maximum opportunity for an on heading
deployment when traveling forward at high airspeeds.
The Genesis features a continuous harness system made
up of type 7 and type 8 webbing, ensuring exceptional
strength at every juncture. The uniquely shaped yoke
is designed to tailor fit the shoulders, promoting
maximum flexibility and comfort.
Standard Features
- Tuck tab riser covers with choice of Style or
Stealth design.
- Hard housings are a featured standard due to their
reliability, even when wet.
- Split leg straps and superior padding in the leg
pads: this greatly reduces the discomfort of opening
shock without adding extra bulk.
- Mini three rings.
- Complete bridle protection pocket.
- Bottom of container deployment pouch.
- Low profile cutaway handle.
- Twenty-eight custom colors to choose from.
- Big Grab toggles.
- Hook Knife.
Options
- Lower articulated harness. (hip rings)
- Large three rings.
- Stainless steel hardware. (now available with
large rings.)
- Custom embroidery on pilot chute gripper
- ROL deployment pouch..
- B-12 leg strap hardware. (now available with hip
rings.)
- Tie dye and specialty fabrics (call for current
availability)
- Reverse Risers available upon request (Large rings
only)
Genesis User Manual
Other Options
It can also be ordered with an optional lower articulated
harness designed to relieve tension on the ring, no
matter how tightly you adjust your harness. This,
combined with contoured leg pads allow for a complete
unconstricting range of motion and comfort.
|
